WINGREEN FPB_V3.0_A01 03ZSTJ1-00-301-RS | Small module

WINGREEN FPB_V3.0_A01 03ZSTJ1-00-301-RS 

· Power supply voltage: The common power supply voltages for general industrial equipment include 24V DC, 110V AC, 220V AC, etc. Small electronic modules powered by 

5V DC or 3.3V DC.

· Power: The power level depends on the functionality and load situation of the device. Simple sensor power may be within a few watts, while some high-power controllers 

may reach tens of watts or even higher.

· Input/output signal types: There are analog signals (such as 0-10V, 4-20mA) and digital signals (such as TTL, CMOS levels). For example, as a sensor, it outputs analog 

voltage or current signals to represent the measured physical quantity; As a controller, it may receive digital signals to execute corresponding control instructions.

· Accuracy: If it is a sensor, accuracy is an important indicator. For example, the accuracy of temperature sensors may be ± 0.1 ℃, ± 0.5 ℃, etc; The accuracy of pressure 

sensors may be ± 0.1% FS (full range), ± 0.5% FS, etc.

· Response time: For some devices that require real-time response, response time is crucial. For example, in a control system, the response time of the controller may be 

required to be between a few milliseconds and tens of milliseconds.

· Measurement range: If it is a measuring device, there will be a specific measurement range. For example, the measurement range of a temperature sensor may be -40 ℃ -120 ℃, and the measurement range of a pressure sensor may be 0-10MPa, etc.

Communication interface: Common ones include RS-232 RS - 485、 Ethernet, CAN bus, etc. Based on the "RS" in the model, it is speculated that it may support RS-232 or 

RS-485 communication protocols.

· Communication speed: Different communication interfaces have different communication speed ranges. For example, the communication rates of RS-232 are commonly 

9600bps, 115200bps, etc; The communication speed of Ethernet includes 10Mbps, 100Mbps, 1Gbps, etc.