The Honeywell 51303932-228 is a Fail-Typically-Active (FTA) digital input module designed for integration with Honeywell’s Universal Control Network (UCN) architecture, widely used in distributed control systems (DCS) such as TDC 3000 and Experion PKS. Unlike its analog counterparts, this module focuses on binary signal acquisition, converting discrete inputs from field devices (e.g., switches, sensors, relays) into digital signals for processing by the DCS controller. Its FTA design ensures inputs default to a preconfigured safe state (e.g., open circuit) during faults, aligning with IEC 61508 SIL 2 requirements for safety-critical applications
Unique to the 51303932-228 is its SDI (Serial Device Interface) compatibility with UDC 6000 systems, making it suitable for applications requiring integration with Universal Display Controller (UDC) devices. This variant supports CE certification and features 2.5 kV galvanic isolation to protect against electrical noise and voltage transients in harsh industrial environments
Signal Input:
- 16-channel digital input with configurable voltage ranges (24 VDC, 48 VDC) for interfacing with proximity switches, limit switches, or alarm contacts.
- High noise immunity: Filters transient spikes up to ±100 V for reliable signal detection in noisy environments.
- Input fail-safe modes: Programmable to treat faults as open or closed, ensuring predictable system behavior during malfunctions.
Safety & Reliability:
- FTA design: Ensures inputs default to a safe state during module failures, critical for emergency shutdown (ESD) systems.
- Dual redundancy support: Optional redundant power supplies and communication paths for mission-critical processes.
- IP65 environmental protection: Dust-tight and water-resistant housing for operation in extreme conditions (e.g., oil refineries, chemical plants) .
Communication:
- UCN network integration: Real-time data exchange with Honeywell controllers (e.g., C200, C300) for immediate control decisions.
- Diagnostic interface: RS-485 port for remote access to channel status, fault logs, and firmware updates.
SDI-UDC 6000 Compatibility:
- Supports serial communication with UDC 6000 displays for operator interface integration in complex control systems.
- Configurable protocol settings (e.g., baud rate, parity) via Honeywell Engineering Workstation software .
Configuration:
- Programmable via Honeywell software: Supports channel-level parameterization (e.g., voltage threshold, debounce time) and real-time status monitoring.
- LED indicators: Provide visual feedback for power, fault status, and channel activity .
| Parameter | Description |
|---|
| Input Channels | 16 digital inputs (24 VDC/48 VDC) |
| Input Impedance | 10 kΩ (24 VDC); 20 kΩ (48 VDC) |
| Response Time | <10 ms (ON/OFF) |
| Signal Isolation | 2.5 kV galvanic isolation |
| Communication | UCN (1 Mbps); RS-485 diagnostic port; SDI for UDC 6000 integration |
| Power Supply | 24 VDC ±10% (1.2 A max), redundant inputs supported |
| Operating Temperature | -40°C to +70°C (operation); -40°C to +85°C (storage) |
| Certifications | CE, IEC 61508 SIL 2 (estimated) |
| Physical Dimensions | 120 mm × 80 mm × 30 mm (rack-mounted) |
| Weight | 0.4 kg (0.88 lbs) |
Modular Architecture:
- Rack-mounted in Honeywell UCN I/O chassis, supporting up to 8 modules per rack for scalable I/O expansion.
- Hot-swappable: Allows module replacement without system shutdown, minimizing maintenance downtime.
Redundancy & Fault Tolerance:
- Built-in self-test (BIST) with diagnostic alerts for open circuits, short circuits, or signal drift.
- Optional dual power supplies and communication paths for fault-tolerant operation .
Industrial Compliance:
- Designed for shock (50 G peak) and vibration (2.5 G RMS) resistance, compliant with IEC 60068-2 standards.
- Extended temperature range (-40°C to +70°C) for extreme industrial environments .
![]()
Consulting telephone：+86 18020721390 
customer service +86 18020721390 
