CAMERON AAP3798102-00130 | Universal display compressor control module

The CAMERON AAP3798102-00130 is an industrial-grade control module specifically engineered for motor control scenarios, with a primary focus on 

compressor systems. As a core component in industrial automation, its fundamental function is to regulate, monitor, and protect the operation of compressors—

ensuring equipment runs stably, safely, and efficiently in harsh industrial environments.

· Key Installation & Wiring Specifications

· To guarantee reliable performance and compliance with industrial safety standards, the module must adhere to the following installation and wiring requirements:

Mounting Requirement: It shall be installed inside a dedicated control enclosure using a universal terminal block or a system-matched terminal board. This installation 

method not only secures the module firmly but also isolates it from external dust, moisture, and electromagnetic interference, safeguarding long-term operational 

stability.

· Use shielded cables to connect the terminal board to each input circuit on the module’s terminal block. This prevents signal distortion caused by external 

electromagnetic noise.

· Attach the shield layer of each cable to the metal panel adjacent to the terminal board (do not connect the shield at the module end). At the module end of the cable, 

cut the shield layer cleanly and insulate the cut end with heat shrink tubing to avoid short circuits.

· For connections between field devices and the terminal board, shielded cables are also mandatory. Ground the shield layer exclusively at the field device end; at 

the terminal board end, cut the shield and insulate it with heat shrink tubing as well.

· Lead Length Constraint: Minimize the length of exposed (unshielded) leads at both the terminal board and field device ends. Shortening unshielded leads reduces 

the risk of signal interference and ensures accurate transmission of control signals.