PROSOFT PLX32-EIP-SIE | Ethernet Protocol Converter

PROSOFT PLX32-EIP-SIE Ethernet protocol converter, used to achieve communication conversion between EtherNet/IP and Siemens Industrial Ethernet.

· Communication Protocol: Supports EtherNet/IP and Siemens S7 protocols, enabling data exchange between these two protocols and enabling communication and 

integration of different types of devices.

· Network connection: Provides 10/100Mbps Ethernet interface with two independent Ethernet ports, allowing each protocol to be located in a separate subnet and 

transmitting data between the two subnets without changing the device IP address.

· Power supply: usually 24VDC, allowable range 10-36VDC, positive, negative, and ground terminals. The nominal current load at 24VDC is 300mA, and the maximum 

current load at 10-36VDC is 610mA.

· Working temperature:- 40 ° C to 85 ° C.

· Storage temperature:- 20 ° C to 85 ° C.

· Relative humidity: 5% to 95%, no condensation.

· Dimensions: 118mm × 85mm × 75mm.

· Memory and data exchange: Up to 10000 16 bit registers can be used to exchange large amounts of data, including embedded EDS additional configuration files to 

simplify integration and reduce debugging time. There is also an SD card slot (SD card optional) for storing configuration files, which can be used for disaster recovery.

· Security features: Built in security functions ensure data integrity and device security, and support security module configuration through module switches (version 1.04 

and higher).