B&R 8B0P0440HW00.000-1 Passive power supply modules

B&R 8B0P0440HW00.000-1 power module.

· Basic information: This is an Austrian B&R product, and all units comply with EN61000-6-3 (emission) and EN61000-6-2 (immunity) standards.

· Installation method: Supports wall installation, cooling table or feedthrough installation.

· Functional features: Adopting a modular design, it is easy to maintain and upgrade. It can be connected to the network through Powerlink, providing advanced diagnostic 

functions and facilitating troubleshooting. Capable of providing stable power supply for ASIC, DSP, microprocessor, FPGA, and other digital or analog loads.

· Input interface: The input part has three signals, namely 12V DC input VIN, working enable voltage ENB, and panel current control signal DIM. The ENB voltage is provided 

by the MCU on the motherboard, with a value of 0 or 3V. When ENB=0, the inverter does not work, and when ENB=3V, it works normally. The DIM voltage is provided by 

the motherboard and varies between 0-5V. The smaller the DIM value, the higher the output current of the inverter.

· Protection function: The internal PWM controller has functions such as overvoltage protection, undervoltage protection, and short circuit protection to ensure the safety 

of the module and load.

· Working voltage: There is information indicating that its working voltage is 220V, but specific details may need to be confirmed by referring to the official manual.