

— product —
customer service +86 18020721390 Email:sakyzeng@foxmail.com
Mobile:+86 18020721390
Telephone:+86 18020721390
Address:7059, 7th Floor, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, China (Zhejiang) Pilot Free Trade Zone, Jinhua City
Brand: ABB
Model: ABB XVC769AE101 3BHE006373R0101 OEI Operator Equipment Interface Board
Warranty: 365 days
Quality: new/second-hand
Delivery method: express delivery
product details
ABB XVC769AE101, order number 3BHE006373R0101, is an OEI (Operator Equipment Interface) board specially designed for ABB AC 800PEC platform, widely matched
with UNITROL generator excitation system and ACS6000 medium voltage drive control racks. It acts as the signal bridge between the local operator panel, HMI, push buttons,
indicator lights and the main control board. This interface board receives manual start/stop, speed setpoint, excitation adjustment and other operation commands from the local panel,
converts them into internal bus signals and transmits them to the main controller. Meanwhile, it feeds back operating status, fault alarms, running indication signals from the control
system to the local panel for display. The PCB adopts conformal coating treatment, which can adapt to vibration, humidity, dust and strong electromagnetic interference inside power
plant and heavy industry control cabinets. It is an indispensable spare part for maintenance, overhaul and emergency replacement of old ABB excitation and medium-voltage drive
systems.

Main Function: Local operation command receiving, status signal feedback, signal conditioning between operator panel and main controller

Standard plug-in rack structure, direct replacement for the same part number, reduce the downtime of generator excitation system or medium voltage drive equipment during
maintenance.
Compact board design, small occupation space, easy to install and arrange inside the excitation or drive cabinet.

The operation commands such as start, stop, raise/lower excitation, speed adjustment from the local operator panel are connected to the terminal block of XVC769AE101. The OEI
board completes signal filtering and level conversion, then sends the valid operation commands to the main control board through the internal backplane bus. After the main controller
executes the corresponding control logic, it returns the running state and fault information to the OEI board. The OEI board converts these signals into drive signals for the indicator
lights and alarm devices on the local panel. If the communication between the OEI board and the main controller is abnormal or the panel loop has short circuit or open circuit fault,
the system will trigger alarm prompts to remind maintenance personnel to troubleshoot.

Related recommendations