ABB PFRL101C 2.0kN 3BSE023316R0002 | force sensor

The rated measuring force of ABB PFRL101C 2.0kN 3BSE023316R0002 force sensor is 2.0kN

· Rated capacity: 2.0kN, which is the maximum force value that the sensor can measure.

· Accuracy level: generally up to 0.05% FS (full scale), ensuring measurement accuracy and reliability.

· Output sensitivity: Typically 2.0mV/V, which means that for every 1V excitation voltage applied, the sensor outputs a signal of 2.0mV at rated load.

Electrical characteristics

· Power supply voltage: It is recommended to use 10V DC, but the generally allowed voltage range is 9-12V DC to ensure the normal operation of the sensor.

· Input impedance: Approximately 3800 Ω, this parameter affects the matching between the sensor and the excitation power supply.

· Output impedance: Approximately 3500 Ω, used for matching with subsequent measurement circuits or amplifiers.

· mechanical properties

· Protection level: IP67， It has good dustproof and waterproof performance and can adapt to harsh industrial environments.

· Material: The sensor body is usually made of stainless steel, which has high strength and corrosion resistance.

· Installation method: Multiple installation options may be provided, such as threaded installation, flange installation, etc., to facilitate installation and fixation on different 

equipment and structures.

· Environmental

· Temperature compensation range: Generally similar to the working temperature range, the impact of temperature changes on measurement results is reduced through an 

internal temperature compensation circuit.

· Humidity range: It can work normally in an environment with relative humidity of 0-95% (no condensation).