EMERSON A6210 9199-00003 | Vibration monitoring module

EMERSON A6210 9199-00003 is a vibration monitoring module from Emerson. The relevant parameters are as follows:

-Size and weight: The size is approximately 81.6 × 32.9 × 82.6mm, and the weight is approximately 0.73kg.

-Power requirements: The working voltage is 24Vdc/120Vac, and the output frequency is 50-60Hz.

-Measurement function: The measurement range can be set through jumper wires, which can achieve the output of vibration or position signals. When used in conjunction 

with specific eddy current sensors, it can form a measurement chain to accurately measure displacement and vibration of industrial equipment.

-Signal output: Using 4-20mA standard current output, it can be easily connected to other industrial control systems and data acquisition systems.

-Calibration requirements: Calibration material 42CrMo4 has been used for calibration before leaving the factory, but when the sensor type and/or cable length change, 

recalibration is required to maintain measurement accuracy.

-Application areas: Widely used for monitoring and fault diagnosis of industrial equipment such as rotating machinery, turbines, generators, etc., for monitoring parameters 

such as shaft displacement and shaft vibration, and preventing mechanical failures.